Something is wrong with the power in your home or building, and you need someone who can tell you what it is and what it takes to fix it. Maybe a breaker keeps tripping under loads that never bothered it before. Maybe an outlet stopped working and you have already pressed the reset button on every GFCI you can find. Maybe the lights dim when the refrigerator kicks on, or a wall feels warmer than it should near an outlet. These are the calls we handle for properties in Reston, and most of them have a clear answer once someone looks at the panel and the circuit. We scope the job on the phone before anything is scheduled, and you get a price before we book the visit. We are available every day from 5:30 AM to 9:00 PM.
Call (571) 933-9789 to get started.
Reston has a wide mix of housing: older townhomes and single-family houses built in the first waves of development, newer construction with modern load demands, and commercial and mixed-use properties that need something different again. Flickering lights and warm outlets are warning signs, not quirks. Whether you are managing a rental unit, running a small business, or dealing with a wiring problem in a home you have owned for years, the process is the same. We talk through the job on the call, confirm what it involves, and give you the rate before the visit is booked.
A lighting upgrade does more than replace a fixture. Recessed lighting changes how a room feels and how it functions, and the difference between a well-planned layout and a string of fixtures placed without a load calculation shows up immediately. We run new circuits where the existing wiring cannot support the change, install dimmer-compatible fixtures where that is the goal, and make sure every switch location is wired correctly before the ceiling is closed back up.
If other electrical work is already opening a wall or a ceiling, adding recessed lighting or a new fixture circuit at the same time saves a second visit and a second round of patching. It is worth asking about when you call.
Outside the house, lighting serves a different purpose. Motion sensor fixtures, driveway lighting, and security lighting at entry points all need weatherproof boxes, correctly rated fixtures, and circuits that can handle the load without borrowing from an already full panel. We handle the wiring from the panel out, including conduit runs where the installation calls for it.
For properties with detached garages or outbuildings, running a circuit for exterior lighting often makes sense alongside a subpanel installation, so the building has its own protected feed rather than a long run from the main panel.
Knob-and-tube wiring turns up in houses of a certain age and is not always a problem in itself, but it becomes one the moment insulation is blown in over it, a circuit is extended from it, or a load is added that it was never designed to carry. When a property has knob-and-tube, we assess what is there, explain what has to be replaced and what can stay, and give you a scope before any work starts.
Aluminum branch-circuit wiring was used in residential construction for a period when copper prices made it the practical choice. The issue is not the wire itself but the connections. Aluminum expands and contracts differently than copper, and connections that were not made with aluminum-rated devices can loosen over time. Remediation involves replacing devices and connectors throughout the affected circuits with aluminum-rated hardware, or re-terminating connections with the correct anti-oxidant compound and listed pigtails. We confirm which approach is right for the property when we scope the job.
A refrigerator, a washing machine, a chest freezer, and a microwave each draw enough current that sharing a circuit with other loads causes problems. Breakers trip. Lights dim. Appliances run hotter than they should. A dedicated circuit for each high-draw appliance keeps the rest of the panel from absorbing the load spikes, and it is the correct installation for anything the manufacturer specifies on its own circuit. We size the breaker and the wire to match the appliance and run the circuit from the panel.
These are 240-volt installations that need the right wire gauge, the right breaker size, and the right outlet or connection type for the appliance. A dryer circuit is not the same as a range circuit, and a wall oven built into a cabinet has different access requirements than a freestanding range. We confirm the specifications before the wire is run so the circuit matches what the appliance actually requires.
Low-voltage work covers a lot of ground: video doorbells that need a transformer or a dedicated circuit, structured wiring for data and media, and the rough-in that a builder or a remodel leaves for a later finish. We handle the electrical side of these installations, including running the circuit and making sure the supply is correctly rated for the device.
Getting your power back is easier than you think, and understanding what shapes the price makes the call go faster. When you describe what is happening, we can usually scope the job on the phone well enough to give you a useful number before anything is scheduled. That number reflects what the work involves, not a flat rate that gets adjusted after we arrive.
What moves a quote is the situation behind the symptom. A dead outlet that traces back to a loose connection is a short repair. A dead outlet that traces back to a failed breaker, which traces back to a panel that is out of space, is a different job. What has to be opened up to reach the fault, whether the existing circuit can carry the change, and whether the panel has the capacity to support new work are the things that change the scope.
For larger projects, a load calculation is part of how we scope the job. That applies to panel upgrades, EV charger circuits, and any work where the question is whether the existing service can carry what is being added. The calculation tells us what the property actually needs before we recommend a panel size or a service upgrade.
One call is enough to get the visit booked.
Houses built in the earlier decades of Reston's development can carry wiring that was standard at the time and is now either outdated or code-deficient by current standards. Knob-and-tube and aluminum branch circuits are the two most common findings, but there is also the matter of grounding. Older wiring systems were often installed without a ground conductor, which means two-prong outlets throughout the house and no ground path for devices that need one.
GFCI and AFCI protection can address some of the risk in ungrounded circuits, and we install arc-fault and ground-fault breakers where the panel and the circuit allow for it. Where the wiring itself has to be replaced, a whole-home rewiring project or a targeted partial rewire is the right answer. We walk through which approach fits the property on the call, because the answer depends on what is in the walls and what the homeowner is trying to accomplish.
Some of the most common electrical work in residential properties runs through spaces that are not easy to reach. Attic wiring, crawl space circuits, and fixtures mounted at height all require planning before the job starts, because the access path changes what the work involves and how long it takes.
Running a new circuit through an attic is straightforward when the attic is accessible and the insulation is not covering the work area. It is a different job when the insulation has been blown in over existing wiring or when the framing does not allow a clean run. We assess the access route when we scope the job so the price reflects the actual conditions.
Tall ceilings and cathedral spaces affect ceiling fan and fixture installations. A fan mounted at fifteen feet needs the right extension rod, a correctly rated box, and sometimes a different installation sequence than a standard eight-foot ceiling. We confirm what the installation calls for before the visit so the right hardware is part of the plan.
Property managers and business owners in Reston often need electrical work done around an occupied schedule. A tenant who cannot lose power to a kitchen for a full day, or a business that needs the lights on during customer hours, calls for a conversation about sequencing before the visit is booked. We talk through timing on the call and confirm what the job requires so the visit is planned around the space.
Some electrical faults need attention before the next available appointment slot. A breaker that will not reset, an outlet with visible burn marks, or a panel that is making sounds it should not make are situations where waiting is not the right answer. We take short-notice calls and are available every day from 5:30 AM to 9:00 PM. If the situation is urgent, say so when you call and we will work out what the schedule allows.
We serve Reston and the surrounding communities throughout this part of Fairfax County. If you are in Herndon, Great Falls Crossing, Wolf Trap, Dranesville, or Difficult Run, we cover your address. The same applies to properties throughout the broader county that fall within our service area.
Coverage is not a question of distance from one point to another. The options are set out on the full list of electrical services.
If you are in this part of Northern Virginia and need electrical work scheduled, call (571) 933-9789 and we will confirm your address is on our list.
Yes. We assess what has been done, confirm it meets current code requirements, and continue from where the previous work left off. If earlier work needs to be corrected before we can proceed safely, we explain what is involved and get your agreement before doing anything additional.
The work itself is similar, but access and coordination are different. In an apartment building, the main panel or distribution board may be in a common area, and work that affects shared circuits requires coordination with the building manager. We factor that into the scope when you call.
Outdoor lighting runs from a circuit in the main panel, either through an existing exterior circuit or a new one we run for the purpose. We install the wiring, the outdoor-rated fixtures, and any switches or timer controls that are part of the plan. The circuit is protected and weatherproofed to suit the location.
In most cases, yes. We plan the work around which circuits need to be isolated and which can stay live, so payment systems and other critical equipment keep running where that is practical. If a shutdown is unavoidable for a particular circuit, we agree on the timing before the work starts so it causes the least disruption.
A workshop typically needs 240-volt circuits for larger power tools, additional 120-volt circuits to avoid overloading a single run, and possibly a subpanel if the distance from the main panel is significant. GFCI protection is required in garage locations. We size the circuits based on the equipment you plan to run.
Whether a permit is required depends on the type of work and the jurisdiction. We account for that when we scope the job and confirm what applies to your address before the visit is booked. If an inspection is part of the process, we coordinate it so the work is completed correctly and documented. Ask on the call and we will tell you what the job involves on that front.
We work with the landlord or property manager to arrange a key or access code, or we schedule the visit for a time when the tenant is available. The access plan is confirmed before the visit is booked so there are no wasted trips.
The most common calls we get from properties in this area involve tripping breakers, dead outlets, flickering lights under load, and panel capacity questions that come up when a homeowner adds an appliance or wants an EV charger. Older properties also generate calls about aluminum wiring and the absence of GFCI protection in kitchens and bathrooms. Most of these have a clear answer once we look at the panel and the circuit, and we scope the job on the phone before anything is scheduled.
Quick response. Code-correct work. Tidy finish.
When you call, a real person answers. We are available every day from 5:30 AM to 9:00 PM for repairs, panel work, new circuits, and larger projects. We scope the job on the call, give you the rate, and confirm what is covered before the visit is booked.
Call (571) 933-9789 and we will take it from there.
The price is settled before we start, and what we agreed is what the job covers.
Towns a short way out: Oakton, Fair Oaks, McLean, Centreville.
View our coverage details.
Below is a look at the electrical work we handle for homes, rental properties, and businesses across Reston. Each service is scoped on the call before anything is scheduled, so you know what the job covers and what it costs before we arrive. Whether the need is a straightforward repair or a larger project like a panel upgrade or whole-home rewire, the process starts the same way: a call, a clear price, and a scheduled visit.
| Electrical Service | Scope of Work | Best For | Good to Know |
|---|---|---|---|
| Electrical Repairs & Troubleshooting | Fault diagnosis from panel to deviceDead outlets and failed switchesBurning smells and warm outlet investigationGFCI and AFCI testing and replacement | Any home or business with an unexplained electrical fault | A full diagnostic runs before any work starts so the actual cause is confirmed, not guessed at. |
| Electrical Panel & Service Upgrades | Panel replacement and load calculationService entrance workAFCI and GFCI breaker installationSubpanel installation for garages and additions | Older homes with 100-amp service, fuse boxes, or panels with no room for new circuits | Reston homes span a wide range of ages and panel types. A load calculation confirms what size service the property actually needs before any panel work is scheduled. |
| Lighting Installation | Recessed and LED fixture installationExterior and security lightingLandscape lighting circuitsCommercial workspace lighting | Residential and commercial properties updating fixtures or adding lighting circuits | If the existing circuit does not have the capacity for a new lighting layout, we handle the circuit work as part of the same job. |
Call (571) 933-9789 to talk through the job and get a price before anything is scheduled.
(571) 933-9789